The washbasins sold by WSTREAMS are decorative. The only fixing point required to secure the washbasin to the surface on which it rests is the drain valve.
The drain valve should not be overtightened when installing the washbasin. If it is too tight, it could lead to cracks appearing in the washbasin.
In the case of glass washbasins, you should not use adhesives or silicone to fix them to the base, as this may lead to the back guard breaking due to the adhesive shrinking, which would affect the finish on the visible side. WSTREAMS will not accept any complaints about stains appearing near to the drainage area if adhesives have been used to fix the washbasin to its base.
Glass washbasins should always be handled on a level surface, and avoid subjecting them to bumps and scratches, as breaking the washbasin’s back guard would affect the finish on the visible side. WSTREAMS will not accept any complaints about problems with the finish caused by improper handling of its washbasins.
The shading of models made from stone may vary as they are manufactured using a natural product composed of veins of varying colours. This should be considered an inherent characteristic of the material which gives each washbasin a unique finish. WSTREAMS will not accept any complaints about shading differences in stone washbasins.
As they are highly rigid, cement washbasins may crack due to rough handling, bumps or high pressure in the installation of the drain valve. Handle these products with care.
It is recommended to use water, neutral soap and a soft cloth for daily cleaning. To prevent limescale stains, we recommend drying the washbasin after use.
These should be cleaned regularly with suitable cleaning products and rinsed with water. Do not use abrasive products to clean them, to avoid scratching the surface of the washbasin.
Repeatedly pouring away high-temperature liquids leads to stresses in the material, which may result in cracks forming to relieve the stresses. To avoid this phenomenon, WSTREAMS advises against pouring high-temperature liquids into the washbasin or to do so gradually.
We recommend always using pH neutral cleaning products. Cleaning products with an acidic/basic pH may alter the colouring of the washbasin.
We recommend using soap and water or pH-neutral products for cleaning. Do not use abrasive products to clean them, to avoid scratching the surface of the washbasin. Cleaning products with an acidic/basic pH may alter the colouring of the washbasin.
Do not pour products with a very high temperature into the washbasin, to prevent cracks from forming.
Repeatedly pouring away high-temperature liquids leads to stresses in the material, which may result in cracks forming to relieve the stresses. To avoid this phenomenon, WSTREAMS advises against pouring high-temperature liquids into the washbasin or to do so gradually.
We recommend using soap and water or pH neutral products for cleaning. Do not use abrasive products to clean them, to avoid scratching the surface of the washbasin. Cleaning products with an acidic/basic pH may alter the colouring of the washbasin.
